Firepunk Diesel

Cummins 24V Common Rail Engine Lift Bracket – Simplify Your Engine Work Make engine maintenance a breeze with the Cummins 24V Common Rail Engine Lift Bracket, designed specifically to fit the rocker box holes. This durable tool is perfect for securely lifting a fully...

Cummins 12v Engine Lift Bracket, made to go in the valve cover holes to make lifting a fully dressed engine easy or just pulling a head for a head gasket job easier. Items included will be: -Engine Lift Bracket -Bolts to mount Engine Lift...

This is a full bolt on traction bar kit, no need for a welder. By using box-bolts and self-threading bolts we can fasten the frame side brackets to a box frame without having to drill through both sides of the frame. This allows us...

These cooler brackets have over 90 degrees of adjustment, so whether you are mounting them in your bed or underneath your truck you should be able to mount your cooler horizontally, vertically, or anywhere in between. -Designed to fit most transmission coolers. -Overall length...

Firepunk Ratchet Shifter Mount for 03-09 Ram. This Mount is designed to work with the B&M Stealth Shifter or the TCI Outlaw shifters.

This is a full bolt on traction bar kit, no need for a welder. By using box-bolts and self-threading bolts we can fasten the frame side brackets to a box frame without having to drill through both sides of the frame. This allows us...

***Due to current supply issues, kits will come with standard Raybestos or Borg Warner clutches*** 48re Kit Includes: 4 Forward Clutches/ 3 Steels 6 Direct Clutches/ 6 Steels with Machined Pressure Plate and Snap Ring 6 Overdrive Clutches/ 6 Steels with Machined Pressure Plate...

This is a full bolt on traction bar kit, no need for a welder. By using box-bolts and self-threading bolts we can fasten the frame side brackets to a box frame without having to drill through both sides of the frame. This allows us...

Firepunk Diesel Switched B&M Stealth Shifter -This shifter is a modified B&M Stealth intended for use with a forward or reverse pattern 3 speed manual valve body. -Overdrive and Lockup are incorporated into the shifter so you do not need to remove your hand...

2013-2018 68RFE High Pressure Valve Body Kit Includes: HD Accumulator cover with additional bolts Sonnax Oversized Solenoid Switch Valve Sonnax Billet Accumulator Kit Bonded separator plate DNJ Billet channel separator plate Mopar Solenoid Pack

2005-2007 48RE Firepunk High Pressure Valve Body w/ new: Governor Pressure Solenoid Transducer O/D Lockup Solenoid Valve Body Wiring Harness Valve Body's are built to order and can take up to 2 weeks depending on workload.

Firepunk Ratchet Shifter Mount for 10-18 Ram. This Mount is designed to work with the B&M Stealth Shifter or the TCI Outlaw shifters. We also offer an add-on to work with a Precision Shifter

Are you tired of your 68rfe not holding power? Do you hate the 20 times it shifts and locks and unlocks while trying to get up to 55mph? Looking to get a little more power out of your truck and want the clutches to...

Parts Included with kit: -(4) Rear Axle 4 link brackets (1/4" thick steel) -(4) Axle Bracket Doublers -(4) Frame mount 4 link brackets (1/4" thick steel) -(4) Frame Bracket Doublers -(4) 1 1/2" Chromoly links, 18" long with chromoly joints -(1) Pan hard Bar...

Want to run AN fittings for all your radiator connections? Here's your solution for the lower radiator connections on your commonrail Cummins! There are a 3 piece design that allow you to mix and match the parts you need, Lower waterneck, tensioner bracket and...

The Anteater is a controller for the 47-series and 48-series (618) Dodge Ram transmissions. It takes the place of a factory PCM and gives total control over the transmission's shift patterns. The main controller is contained in a weatherproof enclosure and the wiring harness...

These traction bars are built with 1.75"x.120 wall chromoly tubing and our heavy duty rebuildable flex joints. Say goodbye to noisy heim joints, these 1" flex joints are built with long lasting delrin bushings and are fully rebuildable. The housing has a large 1"-14...

1996-1999 47RE Firepunk High Pressure Valve Body w/ new: Governor Pressure Solenoid Transducer O/D Lockup Solenoid Valve Body Wiring Harness Valve Body's are built to order and can take up to 2 weeks depending on workload.

2000-2002 47RE Firepunk High Pressure Valve Body w/ new: Governor Pressure Solenoid Transducer O/D Lockup Solenoid Valve Body Wiring Harness Valve Body's are built to order and can take up to 2 weeks depending on workload.

2003-2004 48RE Firepunk High Pressure Valve Body w/ new: Governor Pressure Solenoid Transducer O/D Lockup Solenoid Valve Body Wiring Harness Valve Body's are built to order and can take up to 2 weeks depending on workload.