Firepunk

***Due to current supply issues, kits will come with standard Raybestos or Borg Warner clutches*** 47RE Kit Includes: 4 Forward Clutches/ 3 Steels 5 Direct Clutches/ 5 Steels with Machined Pressure Plate and Snap Ring 6 Overdrive Clutches/ 6 Steels with Machined Pressure Plate...

Are you tired of your 68rfe not holding power? Do you hate the 20 times it shifts and locks and unlocks while trying to get up to 55mph? Looking to get a little more power out of your truck and want the clutches to...

We are excited to offer these simple to install front driveshaft loops for the 3rd and 4th gen Ram truck. It is just a matter of drilling 2 holes in the webbing of the front differential and running 2 bolts to get it installed....

Are you tired of your 68rfe not holding power? Do you hate the 20 times it shifts and locks and unlocks while trying to get up to 55mph? Looking to get a little more power out of your truck and want the clutches to...

Firepunk Diesel Switched B&M Stealth Shifter -This shifter is a modified B&M Stealth intended for use with a forward or reverse pattern 3 speed manual valve body. -Overdrive and Lockup are incorporated into the shifter so you do not need to remove your hand...

Firepunk Ratchet Shifter Mount for 03-09 Ram. This Mount is designed to work with the B&M Stealth Shifter or the TCI Outlaw shifters.

47RH, 47RE and 48RE Firepunk High Pressure Valve Body w/ new: Governor Pressure SolenoidTransducerO/D Lockup SolenoidValve Body Wiring Harness Valve Body's are built to order and can take up to 3-4 weeks depending on workload.

Are you tired of your 68rfe not holding power? Do you hate the 20 times it shifts and locks and unlocks while trying to get up to 55mph? Looking to get a little more power out of your truck and want the clutches to...

Firepunk Rear Adjustable Control Arms These control arms are designed to be a direct replacement for your factory rear control arms on the 4th and 5th gen Trucks with the Coil Spring rear. They are a custom bore and width so that all factory...

Straps are Kevlar - 9800 lb Capacity Quick-release titanium buckles - 3000 lb Rating 3/8" cable has a 3000 rating for comparison Sold individually, most engine configurations require two straps

Want to run AN fittings for all your radiator connections? Here's your solution for the upper radiator connections on your commonrail Cummins! They allow for a -20 an straight cut o-ring fitting and a -12 an straight cut o-ring fitting for your Coolant bypass...

Firepunk Adjustable Control Arms These control arms are designed to be a direct replacement for your factory control arms. They are a custom bore and width so that all factory hardware can be used. We use a rebuildable flex joint with a zinc coated...

Want to run AN fittings for all your radiator connections? Here's your solution for the lower radiator connections on your commonrail Cummins! There are a 3 piece design that allow you to mix and match the parts you need, Lower waterneck, tensioner bracket and...

The Anteater Pro is a controller for the 47-series and 48-series (618) Dodge Ram transmissions. It takes the place of a factory PCM and gives total control over the transmission's shift patterns. The main controller is contained in a weatherproof enclosure and the wiring...

Parts Included with kit: -(4) Rear Axle 4 link brackets (1/4" thick steel) -(4) Frame mount 4 link brackets (1/4" thick steel) -(4) 1 1/2" Chromoly links, 18" long with chromoly joints -(1) Pan hard Bar kit, 1 1/2" Chromoly bar (you cut to...

***Due to current supply issues, kits will come with standard Raybestos or Borg Warner clutches*** 48RE Kit Includes: 4 Forward Clutches/ 3 Steels 6 Direct Clutches/ 6 Steels with Machined Pressure Plate and Snap Ring 6 Overdrive Clutches/ 6 Steels with Machined Pressure Plate...

Are you tired of your 68rfe not holding power? Do you hate the 20 times it shifts and locks and unlocks while trying to get up to 55mph? Looking to get a little more power out of your truck and want the clutches to...

The Anteater is a controller for the 47-series and 48-series (618) Dodge Ram transmissions. It takes the place of a factory PCM and gives total control over the transmission's shift patterns. The main controller is contained in a weatherproof enclosure and the wiring harness...

We are so happy to release the newest Smartbox to allow you to easily swap from a 68RFE to a 48re. The Porcupine has a simple plug and play design that plugs right into the 68RFE transmission plug and the 48RE Neutral safety on...

These traction bars are built with 1.75"x.120 wall chromoly tubing and our heavy duty rebuildable flex joints. Say goodbye to noisy heim joints, these 1" flex joints are built with long lasting delrin bushings and are fully rebuildable. The housing has a large 1"-14...